Chinese English
HOME ABOUT US PRODUCTS NEKWORK CULTURE NEWS FEEDBACK CONTACT US
QIANG'AO METAL  Products
Contact us
ining Qiang'ao Metal Products Co.,Ltd
Company Phone:0537-2343526
Company Phone:0537-2343866
Company Phone:0537-2343066
Company Fax:0537-2343566 
email:yongqiang.1970@163.com
email:qiangao2006@163.com
Website:http://www.jnqajs.com
Company Adress: No.3 of Jidian 2nd Road, Rencheng District,Jining ,Shandong Province,China

 
  Current page > 新闻动态

Suggested that chain cleaning method

   Hot soapy water, hand sanitizer, hold an abandoned toothbrush or slightly a little bit hard to brush can also be, pour the water scrub directly, cleaning effect is not very good, and need to dry after washing, or it will rust.
   Special cleaning agent chain, generally are imported products, cleaning effect is good, and the effect of lubrication is also very good, professional car shop sales, just price is quite expensive, taobao is also available, if you have a good economic foundation can be considered.
   Metal powder, look for a bigger container, take a spoonful with boiled water, will take off after the chain on the water with a stiff brush clean.
   Advantages: can easily chain of oil to clean, and generally do not butter washed away in the inner ring, not irritating, and does not hurt the hand, it is to do mechanical work master are commonly used to wash their hands, security is very strong. Can buy larger hardware store.
   Disadvantages: due to the auxiliary is water, so the chain must be dry or dry after cleaning, take longer time.
   Wash chain with metal powder is a commonly used way of clean, I am the individual feels better to use, if you have to recommend, if there is any discrepancy in which point on the cleaning method can be widely advice. Often need to get off the chain of cleaning juyou suggested a magic buckle, save time and effort.
   Lubrication of chain
   Every time after cleaning, wipe or solvent cleaning chain, be sure to add lubricating oil, and add lubricant to ensure that the chain is dry before. To penetrate lubricating oil chain bearing parts first, and then to become stiff or dry. So that we can indeed lubrication chain easy to wear and tear parts (two) on both sides of the joint. Good lubricating oil, just began to feel like water, easy penetration, but after some time will be sticky or dry, can have the effect of permanent lubrication.
   Good lubricating oil, use dry cloth to wipe of the excess oil on the chain, can avoid the dirt and dust adhesion. Before remounted chain, remember to clean the chain link each other, make sure that no dirt residues. Chain after cleaning, in the assembly magic buckle money, should also some grease on the spindle inside and outside.


Suggested that chain cleaning method 2015-11-7 This article has been read 914 次
Previous:The category of the steel wire rope clipnext:When using the steel wire rope clip should also pay attention to the following two points

All rights reserved:Jining Qiang'ao Metal Products Co.,Ltd    Technical support: ZHONGXUN  INTERNET  MEDIA

Company Phone:0537-2343526    Company Fax:0537-2343566